If you’ve encountered issues with your DEWALT DCS573 cordless saw, you’re not alone. Power tools can sometimes act up, but many problems are fixable with some troubleshooting and a little know-how.
In this article, we’ll explore some common problems with the DEWALT DCS573 and how to address Dewalt DCS573 Stopped Working.
First Thing First:
Initial Problems: If you have just bought dewalt dcs573 circular saw and facing problems than this may be caused by manufacturer defect so go for complaining and returning your circular saw. You can also see for warranty if their is any but only after 6 months not in first month just return it back.
Longevity: The longevity of dewalt dcs573 is about 14 months, after this period itis impossible to fix them because every thing has its lifespan and after that it is total waste of time to work on them they will surely cause problem again and agai, so go for buying new circular saw.
Dewalt DCS573 Stopped Working:
1. Power Supply Issues:
A non-responsive DEWALT DCS573 cordless saw is often due to power supply problems.To tackle this issue, start by checking the battery’s connection to the saw.
Ensure that the battery is charged, and if possible, try using a different, fully charged battery. Sometimes a faulty or depleted battery can lead to the saw not working properly.
2. Blade Brake:
If your saw starts, tries to turn a few times, and then abruptly stops, it might be related to a blade brake issue. This could result from a defective brake mechanism or a problem with the blade itself.
To diagnose this, inspect the brake and the blade, and replace any components if needed.
3. Brushes:
In case your DEWALT DCS573 is not a brushless model, the brushes may be the culprit. Examine the brushes for wear or damage, and replace them if necessary.
This simple step can often restore the functionality of the saw.
4. Blade Inspection:
Sometimes, the issue could be with the blade itself. To rule this out, remove the blade and attempt to start the saw without it. If the saw still doesn’t work, then the blade is not the problem.
If it does work without the blade, inspect the blade for damage or ensure it’s properly installed.
5. Electrical Component Fault:
Inspect the batteries' conductive plates for damage or any visible signs of wear and tear. If these plates are damaged or divided, they can cause the saw to stop working.
If no issues are found with the battery, it might be an electrical component fault.
6. Warranty and Professional Repair:
If your DEWALT DCS573 is still under warranty, it’s essential not to take actions that could void the warranty. In such cases, it’s best to contact a licensed DEWALT repair technician to address the problem.
7. DIY Repair:
For saws that are out of warranty, you may attempt some DIY troubleshooting. Begin by visually inspecting the tool for visible issues, checking the outlet for power, and removing the blade to clear out any debris.
If these steps don’t resolve the problem, it might be time to take the saw to a licensed repair technician who can diagnose and fix the issue professionally.
Conclusion:
Remember that while some problems can be resolved with DIY methods, others require the expertise of a licensed DEWALT repair technician. Safety should always be a top priority when working with power tools.
